Description

The R-6 curb marker can be installed in various structures such as curbs, interlocking pavement and asphalt when the thickness is at least 6.5 cm (2.5"). Its installation requires a hole of 5 cm (2") in diameter to a depth of 12.5 cm (5") and requires the use of a level and quick-setting cement paste. Yellow, orange or green polyethylene stem, 19mm (3/4") in diameter with a fiberglass center, approximately 1.7m (5.58 ft) long. The stem is accompanied by a high intensity reflective tape of 7,5 cm (3") high located at 17 cm (6,5") from the end of the stem and a red vinyl cap of 4 cm (1.5") long. The stem is chamfered approximately 8 cm (3 1/8") from its base to receive the stem connector. R-6 stems can be easily repaired when broken at their base.

Specifications

• Complete kit includes:
• Stem
• Receptacle
• Stem Connector
• Cap

Dimensions

• Diameter : 19mm (3/4")
• Length : 1.7m (5.58 feet)
• Cap : 4 cm (1.5")
• Reflective tape : 7.5 cm (3")

Materials

• Stem : Low density polyethylene
• Stem (Center) : Fiberglass
• Cap : Vinyl

Available colors

• Stem : Yellow, Orange and Green
• Cap : Red